11/20/2025: Dear Friends, I am currently in chemotherapy and unable to promptly answer emails or ship orders. I will do my best to take care of your needs, but hope you can be patient. Thank you all for your support.

Mountain Bike Wheels built with White Industries hubs

Mountain Bike Wheels built with White Industries hubs on this page:

Front wheels: White Industries 32-hole hub/Mavic Ceramic 117 rim front wheel | White Industries 32-hole RX Disc hub/Mavic 217 CD clincher rim front wheel | White Industries RX Disc 32-hole hub with rotor/Mavic 217CD 26" rim front wheel

Rear Wheels: White Industries 32-hole, 10-speed hub/Mavic X517 Ceramic rim rear wheel

We don't have an on-line shopping cart. If you see something that interests you or if you have a question, please call us at (503) 480-2001 or email: sscycleworks@comcast.net

All of the hubs in used wheels that we offer for sale have been serviced.

---

White Industries Mountain 32-hole hub/Mavic 117 Ceramic rim front wheel. Very lightly used, $500.00/each

• This wheel is handbuilt using Wheelsmith 15/16 double-butted spokes and alloy nipples.
• This wheel weighs 800 grams.

Here's the wheel.

Looking down on the wheel.

The Mavic rim decals

Here's the White Industries hub.

---

Front wheel built with White Industries 32-hole RX Disc hub/Mavic 217 CD clincher rim. Used, $150.00/each

• This wheel is built with Wheelsmith 15/17/15 gauge double-butted spokes and alloy nipples
• This wheel weighs 750 grams.
• This hub has an obscure 163mm, 3 hole front rotor for Rockshox disc brake calipers! This is compatible only with Rockshox calipers. These will fit White Industries RX and Formula DC91-RS front hubs. The bolt pattern spacing is larger than IS 6-bolt rotors, so these cannot be used with standard hubs.

Side view

The hub with its 3-bolt rotor mount.

Straight on shot of the hub and the disc rotor mount.

The other side of the hub.

The Mavic 217 rim.

One of the wheel's alloy nipples

Looking in the rim at the valve hole.

---

Front wheel built with White Industries RX Disc 32-hole hub with rotor/Mavic 217CD 26" rim. Used, $200.00/each

• This wheel is built cross-3 with Wheelsmith 15/17/15 gauge spokes & DT Alloy nipples.
• This wheel has a Velox rim tape.
• These wheel weighs 900 grams.
• The hub is unique, as the bolt circle is proprietary to the RX rotor. It is a rotor that is discontinued and difficult to find.

Side view

Close-up of the hub and disc.

Obviously, the disc side of the hub.

The Mavic 217CD rim and the Wheelsmith alloy nipples.

The Mavic rim sidewall.

Looking in the rim at the valve hole

---

Rear wheel built with White Industries 32-hole, 10-speed rear Racer hub/Mavic X517 Ceramic 26” rim. Lightly used, $600.00/each

• Built 3-cross with Wheelsmith 14/15/14 gauge stainless steel spoke & brass nipples.
• This wheel has a Velox rim tape.
• This wheel weighs 940 grams

Side view

The White Industries hub non-drive side.

The hub's drive side.

The hub's center section

The wheel's Mavic X517 26" Ceramic rim.

Close-up of the rim sidewall

Looking ion the rim at the valve hole