11/20/2025: Dear Friends, I am currently in chemotherapy and unable to promptly answer emails or ship orders. I will do my best to take care of your needs, but hope you can be patient. Thank you all for your support.

Road wheels built with SunTour hubs

Road wheels built with SunTour hubs on this page:

Front wheels: SunTour SL 32-hole hub/Campagnolo Melbourne 56 rim

Wheel sets: SunTour 32-hole RH-4600 hubs/Araya 20A rims

We don't have an on-line shopping cart. If you see something that interests you or if you have a question, please call us at (503) 480-2001 or email: sscycleworks@comcast.net

About our wheels:

1. All used wheels that we offer for sale have been overhauled. Some have been re-built with new spokes, bearings, cones, hubs or rims, according to their needs.
2. Quick-release new wheels will be provided with a skewer.
3. All wheels, new or used, have been trued, tensioned, and bearing tension adjusted 
4. Axle bearing tension performed.

---

Front wheel built with new SunTour SL 32-hole hub/Campagnolo Melbourne 56 700c rim. New hub-used rim, $75.00/each.

• This wheel is built with DT stainless steel spokes
• This wheel weighs 970 grams.

• This is a quality wheelbuild with a mirror spoke assembly.

Here's a side view of the wheel.

The wheel's SunTour hub.

Side view of the SunTour hub.

Here's the wheel's Campagnolo Melbourne 56 rim

The Campagnolo Melbourne 56 model decal.

Looking in the Campagnolo Melbourne 56 rim at the valve hole.

---

Wheelset built 3-cross with 32-hole SunTour RH-4600 Sealed Cartridge Bearing Hubs, Araya A20 Rims, & DT 14 gauge galvanized spokes. Used, $500.00/set

OEM (Original Equipment Manufacturer) Wheelset built with 120mm rear spacing. They could be re-spaced, but that would require new spokes as they were a precise build. 

Using proprietary tools, I re-lubed the cartridge bearings as the grease of 45 or more years had coagulated. They should be good for decades now!

The Araya rims are double-ferruled.

• Front wheel: 1,000 grams.
• Rear wheel: 1,050 grams.

Side view of the wheelset

Just the front wheel

The front hub

The front hub rotated 180 degrees

Side view of the front hub.

The other side of the front hub.

The Araya label on the front rim.

Looking in the front rim at the valve hole.

The rear wheel

The rear SunTour hub

The rear hub rotated 180 degrees.

The rear hub's drive side

Here's the rear hub's non-drive side

Here's the rear rim at the rim joint.

Looking in the rear rim at the valve hole

Here's one of the hub bearings with coagulated grease that we cleaned out and replaced

Here are pictures of the special SunTour tools needed for servicing their cartridge bearing hubs. They are NOT for sale and are not included with the wheels.

Here's one of them

Here's that same tool turned over.

Here's the other SunTour hub tool

That same tool turned over